Welcome to Primary Networks

Defence and Marine Certified Computers and Displays

R15ID3S-65A1FTP Intel Dual Core Atom N2600 Full IP65 Series

15" Panel PC with Intel® Atom Dual Core N2600 1.6GHz


  • 15″ TFT XGA LCD
  • Intel® Atom Dual Core N2600 1.6GHz Processor
  • 1x DDR3 SO-DIMM 800/1066 MHz, max 4GB
  • Dual Broadcom BCM57780 GbE controller
  • 1 x COM, 2 x USB 2.0,1 x LAN, 1 x Power input
  • For I/O part to be IP65, it’s suggested to use LAN/USB/COM only
  • Enclosure: Completely sealed, IP65 (NEMA 4X) grade.
  • Widely used in chemical industry, food industry, medical devices, appliances etc. with good corrosion resistance
  • Stainless Material:
    304SUS 304S304003041.4301
Download Datasheet
Model ZX5G-AVT1-50 xx
Order Now

LCD Panel Specification:

Active Display Area304.1 (H) x 228.1 (V)
Pixel Pitch0.297 (H) x 0.297 (V)
Panel_Display Resolution1024×768
Panel_Contrast Ratio700:1 (typ.)
Display Color16.2M (6bits+FRC)
Panel_Brightness400 (typ.)
Panel_Viewing Angle-80~80 (H); -60~80 (V)
Recommend Resolution1024×768@60Hz, 75Hz
Power ManagementVESA DPMS Compliant
Plug PlayVESA DDC 1/2B
Touch_SensorTypeProjected Capacitive

System Specification:

Processor SocketOnboard
ProcessorIntel® Atom Dual Core N2600 1.6GHz
ChipsetIntel® 945GSE / ICH7M
MemoryDDR3 800/1066 MHz SO-DIMM Slot, Max. 4GB
BIOSAMI 16Mbit Flash
VGA ControllerIntegrated Graphics
LCD Support24 bit single-channel LVDS
EthernetDual Broadcom BCM57780 GbE controller
AudioRealtek ALC886 HD Audio Codec
Serial1 x RS-232,1 x RS-232/422/485(inside)*
Watchdog Timer256 Levels
Expansion Slots1 x Mini PCI (internal)
Storage2.5 inch 160GB
OSWindows 7 embedded, WindowsXP embedded
Power AdapterDC IN 12V
EnvironmentEnvironment & Dimensions
TemperatureOperating : -20 deg.C to 60 deg.C
Humidity30% to 90% non condensing
CoolingFanless cooling concept
ShockOperating:15G, 11ms duration
VibrationOperating: 5 Hz ~ 500 Hz/ 1 Grms/ 3 Axis Packing:: 5 Hz ~ 500 Hz/ 2.16 Grms/ 3 Axis

I/O Connectors :

Back Panel I/O Port
  • 1 x COM
  • 1 x LAN
  • 2 x USB
  • 1 x Power input


Note: All Specifications are subject to change without prior notice!
*If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.