Defence Certified Computers
Primary Network Products (UK) Limited

R15ID3S-65FTE Flat Stainless for Hazardous Location

15" Panel PC with Intel® Atom Dual Core N2600 1.6GHz


  • This Equipment is suitable for use in Class I, Division 2, Hazardous area
  • Wide power input 9-36V DC with isolation protection
  • Special metal (M12) Connectors
  • Designed with NEMA 4 (IP65) dust proof and water protection
  • Robust and fanless design for reliable operation
  • Fanless Cooling System and Ultra Low power consumption
  • Support Intel Atom N2600 processor
  • ELO 5W Resistive Touch ( Explosion-proof )
Download Datasheet
Flat Stainless for Hazardous Location
Order Now

LCD Panel Specification:

Panel_Size 15″
Active Display Area 304.1 (H) x 228.1 (V)
Pixel Pitch 0.297 (H) x 0.297 (V)
Panel_Display Resolution 1024×768
Panel_Contrast Ratio 700:1 (typ.)
Display Color 16.2M (6bits+FRC)
Panel_Brightness 600(typ.)
Panel_Viewing Angle -80~80 (H); -60~80 (V)
Recommend Resolution 1024×768@60Hz, 75Hz
Power Management VESA DPMS Compliant
Plug Play VESA DDC 1/2B
Touch_SensorType Resistive, Projected Capacitive

System Specification:

FormFactor 3.5″
Processor Socket Onboard
Processor Intel® Atom Dual Core N2600 1.6GHz
Chipset Intel® NM10
Memory DDR3 1333 MHz SO-DIMM Slot, Max. 4GB
BIOS AMI 16Mbit Flash
VGA Controller Integrated Graphics
LCD Support 24 bit single-channel LVDS
Ethernet Dual Broadcom BCM57780 GbE controller
Audio Realtek ALC886 HD Audio Codec
Serial 1 x RS-232,1 x RS-232/422/485(inside)*
Watchdog Timer 256 Levels
Expansion Slots 1 x Mini PCI (internal)
Storage 2.5 inch 160GB
OS Windows XP Embedded / Windows XP PRO Embedded/ Windows Embedded 7 Standard / Windows 7 PRO for Embedded System
Power Adapter DC IN 12V
Environment Environment & Dimensions
Temperature 0°C ~50°C (Certified by UL) -10°C ~50°C (Tested Temperature)
Humidity 10% to 95% non condensing
Cooling Fanless cooling concept
Shock MIL-STD-810G Method 516.6
Vibration MIL-STD-810G Method 514.6

I/O Connectors:

Back Panel I/O Port
  • 1 x COM
  • 1 x LAN
  • 2 x USB
  • 1 x Power input


Note: All Specifications are subject to change without prior notice!
*If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.