R10ID8M-RTT2GP
Features
● 10.4″ High Quality 1024 x 768 Resolution TFT-LCD Panel
● IntelR Atom Dual Core N2800 1.86GHz with IntelR NM10 Chipset
● 1 x SODIMM, Max. 4GB DDR3-1066 (Default 2GB)
● 4 Wire Resistive Touch
● Brightness up to 700nit enhanced visibility
● Alu-Mg Alloy Housing with Protection Rubber for MIL-810G Shock, Vibration and Drop Std.
● Built-in Wireless/ Bluetooth/ and GPS module
● Support 3G function (for optional)
● Ergonomic Design with Handstrap and Carry Belt Accessories (Optional)
● 6cell, 5200mAh Lithium-Ion Battery Pack
Panel Size:
| Panel_Size | 10.4″ |
| Panel_Brightness | 700 (typ.) |
| Panel_Display Resolution | 1024×768 |
| Panel_Contrast Ratio | 1200:1 (typ.) |
| Display Color | 16.2M (6bits+FRC) |
| Touch_SensorType | 4 Wire Resistive |
System Specification:
| Processor | Intel Atom Dual Core N2800 1.86GHz |
| BIOS | AMI System BIOS |
| Chipset | Intel® NM10 Chipset |
| Memory | 1 x SODIMM, Max. 4GB DDR3-1066(Default 2GB) |
| LAN Controller | Gigabit-LAN BCM57780, 10/100/1000 Mbps |
| Storage | Support 64GB mSATA SSD (Max. up to 256GB) by mini PCIe interface. |
| Audio | Audio out for headset, Micro-in for microphone jack,1.5W Speaker (Internal) |
Wireless Communication:
| WLAN | 802.11 a/b/g/n 2T2R |
| Bluetooth | Bluetooth 4.0 + Class I |
| WWAN | Built-in 3G module (optional) |
| GPS | Built in GPS module |
I/O Connectors:
| Left I/O Connectors | 1 x LAN, 2 x USB 2.0, 1 x Audio out, Micro-in Jack, 1 x Power Input Jack, 1 x Reset Button |
| Right I/O Connectors | 1 x COM, 1x VGA,1x SIM Card, 1x SD Card Slot |
| Downside I/O Connectors | Docking Connector to expansion for 4 x USB and Docking Stand Power Input |
In front Control:
| Control Button |
|
| LED indicator |
|
Mechanical and Environment:
| Dimensions (W x L x H) | 323 x 244 x 53 mm |
| Net Weight (kg) | 2.5 Kg (w/o accessories) |
| Operating Temperature | -20 deg.C to 60 deg.C (with SSD solution) |
| IP Proof | IP54 (Optional for IP65) |
| Operating Humidity | 10% to 90% (non condensing) |
| Mounting | VESA mount, Vehicle mount |
| Certifications |
|
Power Management:
| Power Input | 19V DC |
| Power Consumption | 11 W typ. |
| Battery | 6 Cell, Li-Ion battery 5200mAh, 11.1V |
| Battery Mark Ver. 4.0.1 Result | 5.5hrs |
| Adapter | 100-240V, 50-60Hz, 19V DC |
| Battery Operating Time | 7 hours** |
Accessories:
| Accessories List |
|
| Accessories Options |
|
Notes:
| *The weight information is for reference purpose.The actual weight will vary according to then options you choose,for example,the touch/glass option. |
| *With BatteryMon Test Program under Power Saving Mode. |
| Note: All Specifications are subject to change without prior notice! *If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function. **Note: Measured at dimming LCD brightness. Varies depending on the usage conditions, or when an external device is attached. |