Welcome to Primary Networks

Defence and Marine Certified Computers and Displays

W22ID3S-65A3 Intel Dual Core Atom D2550 Full IP65 Series


  • 21.5″ TFT SXGA LED panel
  • Intel® Dual Core Atom D2550 1.86GHz Processor
  • 1 x SO-DIMM, Max 4GB DDR3 800/1066
  • Integrated VGA, 24 bit single-channel LVDS, DVI
  • Integrated Dual Broadcom BCM57780 Ethernet
  • 1 x COM, 2 x USB 2.0
  • For I/O part to be IP65, it’s suggested to use LAN/USB/COM only
  • Enclosure: Completely sealed, IP65 (NEMA 4X) grade.
  • Widely used in chemical industry, food industry, medical devices, appliances etc. with good corrosion resistance
  • Stainless Material:
    304SUS 304S304003041.4301


Download Datasheet
Model ZX5G-AVT1-50 xx
Order Now

LCD Panel Specification:

Active Display Area476.64 (H) x 268.11 (V)
Pixel Pitch248.25(per one triad)(H) x 248.25(V)
Panel_Display Resolution1920×1080
Panel_Contrast Ratio1000:1 (typ.)
Display Color16.7M (8bits/color)
Panel_Brightness250 (typ.)
Panel_Viewing Angle-85~85 (H); -80~80 (V)
Recommend Resolution1920×1080 @60Hz
Power sourceAC110~240V,Universal, ±10%
Power Consumption35 W typical, normal operation

System Specification:

Processor SocketOnboard
ProcessorIntel® Dual Core Atom D2550 1.86GHz
ChipsetIntel® NM10
Memory1 x SODIMM, Max 4GB DDR3 800/1066
BIOSAMI 16Mbit Flash
VGA ControllerIntegrated in Intel NM10, LVDS/CRT and Chrontel Chipset
LCD Support24-bit LVDS (Dual channel)
EthernetDual Broadcom BCM57780 Ethernet
Serial1 x RS-232,3 x RS-232/422/485(inside)*
USB6 x USB (4 x USB inside)
Watchdog Timer256 Levels
Expansion Slots1 x Mini PCIe (for wireless module)
StorageMini PCIe SSD/ 2.5 inch HDD
OSWin7 Embedded
Power AdapterDC IN 12V
EnvironmentEnvironment & Dimensions
TemperatureOperating : 0 deg.C to 45 deg.C
Humidity30% to 90% non condensing
CoolingFanless cooling concept
ShockOperating:15G, 11ms duration
VibrationOperating: 5 Hz ~ 500 Hz/ 1 Grms/ 3 Axis Packing:: 5 Hz ~ 500 Hz/ 2.16 Grms/ 3 Axis


Note: All Specifications are subject to change without prior notice!
*If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.