Welcome to Primary Networks

Defence and Marine Certified Computers and Displays

R19ID3S-65A1 Intel Dual Core Atom D2550 Full IP65 Series



  • 19″ TFT XGA LCD
  • Intel® Dual Core Atom D2550 1.86GHz Processor
  • 1 x SO-DIMM, Max 4GB DDR3 800/1066
  • Integrated VGA, 24 bit single-channel LVDS, DVI
  • Integrated Dual Broadcom BCM57780 Ethernet
  • 1 x SATA, 4 x COM, 6 x USB 2.0, 8 x GPIO, 1 x Mini PCIe slot
  • For I/O part to be IP65, it’s suggested to use LAN/USB/COM only
  • Enclosure: Completely sealed, IP65 (NEMA 4X) grade.
  • Widely used in chemical industry, food industry, medical devices, appliances etc. with good corrosion resistance
  • Stainless Material:
    304SUS 304S304003041.4301
Download Datasheet
Model ZX5G-AVT1-50 xx
Order Now

LCD Panel Specification:

Active Display Area376.32(H) x 301.06(V)
Pixel Pitch0.294(H) x 0.294(V)
Panel_Display Resolution1280×1024
Panel_Contrast Ratio1000:1
Display Color16.7M,6 bit
Panel_Viewing Angle85:85(H) ; 80:80(V)
Recommend Resolution1280×1024@60HZ,75HZ
Power sourceAC110~240V,Universal, ±10%
Power Consumption35 W typical, normal operation

System Specification:

Processor SocketOnboard
ProcessorIntel® Dual Core Atom D2550 1.86GHz
ChipsetIntel® NM10
Memory1 x SODIMM, Max 4GB DDR3 800/1066
BIOSAMI 16Mbit Flash
LCD Support24-bit LVDS (Dual channel)
EthernetDual Broadcom BCM57780 Ethernet
Serial1 x RS-232,3 x RS-232/422/485(inside)*
USB6 x USB (4 x USB inside)
Expansion Slots1 x Mini PCIe (for wireless module) 1 x Mini PCIe (for SATA SSD)
StorageMini PCIe SSD/ 2.5 inch HDD
OSWindows 7
Power AdapterDC IN 12V
CoolingFanless cooling concept
ShockOperating:15G, 11ms duration
VibrationOperating: 5 Hz ~ 500 Hz/ 1 Grms/ 3 Axis Packing:: 5 Hz ~ 500 Hz/ 2.16 Grms/ 3 Axis

Mechanical and Environment:

Dimensions ( L x W )460 x 385 x 63 mm
Operating TemperatureOperating : 0 deg.C to 45 deg.C
Operating Humidity10% to 95% non condensing
MountingOne robust bracket with locing handle (Can adjust from -5 deg. to 90deg.)


Note: All Specifications are subject to change without prior notice!
*If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.