Welcome to Primary Networks

Defence and Marine Certified Computers and Displays

R15ID3S-65EX Flat Stainless for Hazardous Location

R15ID3S-65EX Flat Stainless for Hazardous Location

Features

  • This Equipment is ATEX Zone 2 certified for Hazardous area applications and suitable for use in Class I, Division 2, Hazardous area
  • Wide power input 9-36V DC with isolation protection
  • Special IP65 connectors with cover plate
  • Designed with NEMA 4 (IP65) dust proof and water protection
  • Robust and fanless design for reliable operation
  • Fanless Cooling System and Ultra Low power consumption
  • Support Intel Atom N2600 processor
  • ELO 5W Resistive Touch ( Explosion-proof )
Download Datasheet
Flat Stainless for Hazardous Location
Order Now

LCD Panel Specification:

Panel_Size15″
Active Display Area304.1 (H) x 228.1 (V)
Pixel Pitch0.297 (H) x 0.297 (V)
Panel_Display Resolution1024×768
Panel_Contrast Ratio700:1 (typ.)
Display Color16.2M (6bits+FRC)
Panel_Brightness550(typ.)
Panel_Viewing Angle-80~80 (H); -70~70 (V)
Recommend Resolution1024×768@60Hz, 75Hz
Power ManagementVESA DPMS Compliant
Plug PlayVESA DDC 1/2B
Touch_SensorType5-Wire Resistive

System Specification:

FormFactor3.5″
Processor SocketOnboard
ProcessorIntel® Atom Dual Core N2600 1.6GHz
ChipsetIntel® NM10
Memory1x DDR3 SO-DIMM 1333 MHz, 4GB default
BIOSAMI 16Mbit Flash
VGA ControllerIntegrated Graphics
LCD Support24 bit single-channel LVDS
EthernetDual Broadcom BCM57780 GbE controller
AudioRealtek ALC886 HD Audio Codec
SATA1 x SATA II
Serial1 x RS-232,1 x RS-232/422/485(inside)*
USB2 x USB
Watchdog Timer256 Levels
Expansion Slots1 x Mini PCI (internal)
StoragemSATA SSD 64GB default, Option up to 128GB
OSWindows Embedded Standard 7 Windows 7 Pro for Embedded Systems
Power AdapterDC IN 12V
EnvironmentEnvironment & Dimensions
TemperatureOperating : -10 deg.C to 50 deg.C
Humidity10% to 95% non condensing
CoolingFanless cooling concept
ShockMIL-STD-810G Method 516.6
VibrationMIL-STD-810G Method 514.6Packing:: 5 Hz ~ 500 Hz/ 2.16 Grms/ 3 Axis

I/O Connectors:

Back Panel I/O Port
  • 1 x COM
  • 1 x LAN
  • 2 x USB
  • 1 x Power input

Notes:

Note: All Specifications are subject to change without prior notice!
*If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.

Top